CCPA Opt-Out by TermsFeed
ADEX Awards Call For Entries 2024-25

Surface Mount Remote IndoorTemperature Sensor

HAI Part Number: 23A00-1The Surface Mount Remote Indoor Temperature Sensor may be mounted in the conditioned space and the thermostat can be mounted remotely for protection from tampering or for aesthetic reasons. This sensor uses twisted pair, shielded cable from the Omnistat thermostat to its location. For distances up to 100 feet, typical twisted pair, PVC-insulated, shielded cable may be used.For distances from 100-150 feet, twisted pair with polypropylene insulated conductors, shielded must be used. For distances from 150-250 feet, twisted pair with foam-polyethylene insulated conductors, shielded must be used.Wire runs must not exceed 250 feet.The Remote Sensor must be mounted in the same location appropriate for a thermostat for best performance (for example, on an inside wall, free of draft from vents, away from sunlight, windows, etc.). This small (2 W X 1.5 H X I D inches) unit is mounted on the surface of the wall. This sensor will work with any Omni family or Lumina family home control system.
ADEX Awards Call For Entries 2024-25
archinterious.com, adexawards.com & designjournalmag.com is part of Archinterious/ADEX Awards™. All content, graphics are copyright © with publisher. Any commercial use or distribution without the express written consent of publisher is strictly prohibited.
Copyright © 2024 Design Journal / Archinterious /ADEX Awards™,
2456 Sturrock Dr, Henderson, NV, 89044, United States.
All Rights Reserved.