A motion-sensing light control ideal for use in outdoor locations, such as backyards, garages and storage buildings. Built-in infrared sensing technology monitors 4,000-sq. ft. field, 110 degrees wide, up to 40 feet in front of unit. When the controller senses motion in its field of view, it can respond by sending two types of signals: ON commands to Receivers set to control lights at four sequential system addresses, and MOTION DETECTED signals to other Infrared Controllers set to the same address. As long as the source of infrared radiation remains in the controller sensor field, it continues illumination along a path from a garage to an entranceway, or around an entire residence, if desired. It can also turn on an inside lighting fixture as well as outdoor fixtures to help deter intruders. The Passive Infrared Outdoor Controller is encased in a moisture-resistant housing. The control panel includes sensitivity adjustments to prevent nuisance tripping by small animals and a time delay to set the length of time the lights stay on (6 seconds to 30 minutes). Manual override of the Infrared Controller can be achieved with the use of other DHC Red-Line Controllers. Passive Infrared Transmitter installs easily into standard round outdoor junction box and comes complete with mounting plate, control unit, par lampholders and complete installation and operating instructions. Color: Brown
